|
IS: CODE
No. |
DESCRIPTION |
|
IS:280-1978 |
Spec. For mild steel wire for general engineering
purposes. |
|
IS:383-1970 |
Spec. For coarse and fine aggregate from natural sources
for concrete |
|
460(P-I)-1985 |
Spec. For test sieves |
|
456-2000 |
Code of practice for plain and reinforced concrete
|
|
460(P-II)-1985 |
Spec. For test sieves |
|
516-1959 |
Methods of tests for strength of concrete |
|
650-1991 |
Standard sand for testing cement specification |
|
702-1988 |
Industrial
bitumen ( second revision) |
|
736-1986 |
Wrought aluminium and aluminium alloys, plates
|
|
814-1974 |
Covered
electrodes for metal arc welding of mild steel |
|
823-1964 |
Code of procedure for manual arc welding of mild steel |
|
961-1975 |
Structural steel (High tensile) |
|
1002-1956 |
Multipurpose grease no.1,no.2 & no.3 |
|
1030-1974 |
Steel casting for general purpose |
|
1077-1976 |
Common burnt clay bricks |
|
1124-1974 |
Method of testing for determination of water absorption,
apparent specific gravity and porosity of natural building
stones |
|
1129-1972 |
Dressing of natural building stone |
|
1139-1966 |
Hot rolled mild steel & medium tensile steel deformed
bars foe concrete reinforcement |
|
1148-1973 |
Rivet bar for structural purposes |
|
1195-1968 |
Procedure for testing of hardness no. of bitumen mastic |
|
1199-1959 |
Methods of sampling and analysis of concrete |
|
1200-1974
part-2 |
Method of measurement of building and civil engineering
works |
|
1200-1974
part-24 |
Method of measurement of building and civil engineering
works |
|
IS 1201-1978
To 1220-1978 |
Indian standard methods for Testing of tar and bitumen
|
|
1239-1979 |
Mild steel tubes (fourth revision) |
|
1239-1979
part-ii |
Mild steel tubular rods and other rods steel pipe
fittings (revision) |
|
1364-1967 |
Precision and semi-precision hexagon bolts, screws, nuts
& lock nuts (dia. Range 6mm to 39mm) (first revision) |
|
1367-1984 |
Technical supply conditions for threaded steel fasteners |
|
1387-1967 |
General requirements for supply of metallurgical
materials |
|
1398-1960 |
Packing paper, water-proof, bitumen-laminated |
|
1442-1964 |
Covered electrodes fir metal arc welding of high tensile
structural steel |
|
1448 |
Method of tests for petroleum and its products |
|
1477 |
Code of practice for finishing of iron and steel/ferrous
metal in building:- painting and allied finishes |
|
1489-1991 |
Portland-pozzolona cement |
|
1498-1970 |
Classification and identification of soils for general
engineering purposes |
|
1514-1959 |
Method of sampling and test for quick lime and hydrated
lime |
|
1597(P-I)-1992 |
Construction of stone masonry (Rubble) |
|
1597(P-II)-1992 |
Construction of stone masonry (Ashlar masonry) |
|
1732-1971 |
Dimensions for round and square steel bars for structural
and general engineering purposes |
|
1785-1966
|
Plain hard drawn steel wire for pre-stressed concrete |
|
1785-1966 |
Cold-twisted steel bars for concrete reinforcement |
|
(Part-1) |
|
|
1786-1985 |
Spec. For HYSD bars and wires for concrete reinforcement |
|
1791-1985 |
General requirements for batch type concrete mixers |
|
1838 |
Performed filler for expansion joint in concrete pavement
and structures (non-extruding and resilient type) |
|
1838-(part-1) 1983 |
Bitumen impregnated fibre (first revision) |
|
1888-1982 |
Method of load tests on soils |
|
1893-1984 |
Criteria for earthquake resistant design of structures |
|
2185(P-II)-1983 |
Spec. for concrete units |
|
2386(P-II)-1963 |
Methods of test for aggregates for concrete |
|
2386(P-III)-1963 |
Methods of test for aggregates for concrete |
|
2395(P-I)-1994 |
Painting of concrete, masonry and plaster surfaces |
|
2395(PII)-1994 |
Painting of concrete, masonry and plaster surfaces |
|
2430-1986 |
Method of aggregates for concrete |
|
2572-1963 |
Code of practice for construction of hollow concrete
block masonry. |
|
2720(p-I)-1983 |
Methods of test for soils (Dry soil samples) |
|
2720(P-II)1973 |
Methods of test for soils (W.L) |
|
2720(P-III/Sec I)-1980 |
Methods of test for soils (S.G) |
|
2720
(P-IV)-1985 |
Methods of test for soils (Grain size analysis) |
|
2720(P-V)-1985 |
Methods of test for soils (Liquid and plastic limit) |
|
2720(P-VI)-1972 |
Methods of test for soils (Shrinkage factors) |
|
2720(P-XV)-1986 |
Methods of test for soils (Consolidation properties) |
|
2720(p-XXVI)1987 |
Methods of test for soils (PH value) |
|
2720(P-28)-1974 |
Methods of test for soils (dry density) |
|
3597-1998 |
Concrete pipes-method of test |
|
4031-1988 |
Method of physical tests for hydraulic cement |
|
4032-1985 |
Method of chemical Analysis of hydraulic cement |
|
4082-1996 |
Stacking and storage of construction materials and
component at site recommendations |
|
4326-1993 |
Earthquake resistant design and construction of buildings
code of practice |
|
4634-1991 |
Batch type concrete mixers method of test performance |
|
4826-1979 |
Spec. for hot dipped galvanized coatings on round steel
wires |
|
5758-1984 |
Spec. for pre cast concrete kerbs, channels edgings,
quadrants and gutter aprons |
|
6042-1969 |
Code of practice for construction of light weight
concrete block masonry |
|
6278-1971 |
Code of practice for construction of light weight
concrete block masonry |
|
6313(P-I)-1981 |
Code of practice for anti termite measures in buildings |
|
6313(P-II)-1981 |
Code of practice for anti termite measures in buildings |
|
6461(P-VIII)-1973 |
Glossary of terms relating to cement concrete. |
|
7246-1974 |
Recommendations for the use of table vibrators for
consolidating concrete |
|
8112-1989 |
43 grade O.P.C specification |
|
9013-1978 |
Method of making , curing and deterning compressive
strength of accelerated cured concrete test specimens |
|
9284-1979 |
Method of tests for abrasion resistance of concrete |
|
9429-1980 |
Code of practice for Drainage system for earth and rock
fill dams |
|
10080-1982 |
Spec. For vibration machine |
|
10262-1982 |
Recommended guide lines for concrete mix design |
|
10329-1982 |
Method for sensitometry of photo graphic papers |
|
12269-1987 |
Specification for 53 grade O.P.C |
|
12468-1988 |
General requirements for vibrators for mass concreting,
immersion type |
|
1292(P-I)-1988 |
Spec. for precast concrete man hole covers and frames |
|
13727-1993 |
Requirements of cluster planning for housings |
|
CED-1997 |
Classified list of Indian Standards (Civil engineering)
(LED) |
|
RVD-1997 |
Classified list of Indian Stands |
|
SP-27-1987
(IS: 2,IS: 1200) |
(River valley engineering) (RVD) Hand book of method of
measurement of building works. |
|
SP-35 (S &
T)-1987 |
Hand book of water supply and drainage (with special
emphasis on plumbing) |
|
SP-36-(P-2)-1988 |
Compendium of Indian Standards on Soil Engineering part-2
field testing of soils for civil engineering purposes. |
IS: 1725-1982
1888-1982
1892-1979 |
Soil product
Method
of local test on soils
Subsurface investigation for foundations |
|
2131-1981 |
Standard penetration test |
|
2132-1986 |
Code of practice for thin-walled tube sampling of soils |
|
2720-(P-28)-1974 |
Methods of test for soils
Determination of dry density of soils, in-space, by the sand
replacement method |
|
2720-(P-29)-1975 |
Determination of dry density of soils, in-space, by the
core. cutter method |
|
2720-(P-31)-1969 |
Field determination of
California
bearing ratio |
|
2720-(P-33)-1971 |
Determination of the density of soil in-space by the ring
and water replacement method |
|
2720-(P-34)-1972 |
Determination of the density of soil in-space by
rubber-balloon method |
|
2720-(P-39/sec-2)1979 |
Direct shear test for soils containing gravel-in-situ
shear test |
|
4434-1978 |
Code of practice for in-situ vane shear test for soils |
|
4968(P-1)-1976 |
Method for subsurface sounding for soils
Dynamic method using 50mm cone without Bento Nite slurry |
|
4968(P-2)-1976 |
-Do-
Dynamic method using cone and Bento Nite slurry |
|
4968(P-3)-1976 |
-Do-
Static
cone penetration test |
|
8763-1978 |
Guide for undisturbed soil sampling of sand |
|
9214-1979 |
Method of deter. Of modulus of sub grade reaction
(K-Value) of soils in field |
|
9640-1980 |
Specification for split spoon sampler |
|
10042-1981 |
Load of practice for site investigations for foundation
in gravel boulder deposit |
|
IS:
10108-1982 |
Code of practice for sampling of soils by thin wall
sampler with stationary piston |
|
10379-1982 |
Code of practice for field control of moisture and
compaction of soil for embankment and sub grade |
|
10442-1983 |
Spec. For earth augers (spiral type) |
|
10593-1986 |
Spec. For equipment for subsurface sounding of soils |
|
11593-1986 |
Spec. For shear box (Large) for testing of soils |
|
11594-1985 |
Spec. For mild steel thin walled sampling tubes and
sampler meads |
|
13827-1993 |
Guidelines for improving earthquake resistance-earthen
buildings |
|
13828-1993 |
Improving earthquake resistance of low strength masonary
buildings - guidelines |
|
13920-1993 |
Code of practice for ductility detailing of reinforced
concrete structures subjected to Seismic forces
|
